How to care for your blundstones

A professional polish can easily be done at home

Blundstone boots and shoes from Australia are known for their long wear. Learn how to properly care for this footwear to extend the life of your investment. Find out how to polish, protect and store your Blundstone shoes.

Dirty boots must be cleaned first, then polished

Lay down a piece of cardboard or a couple of sheets of newspaper on a table or hard work surface to protect your furnishings.

Clean each shoe with a damp cloth, removing any mud, grit, sand or oil. Work by rubbing the cloth in small circles over the leather surface of the shoe. Frequently rinse the cloth with clean water and wring out. Repeat this step until the leather is completely clean. Finally, use a separate damp cloth to clean the soles of the shoe and its edge. If boots are very muddy on the soles, they can first be rinsed under running water.

Take a clean dry cloth and dip in the boot polish. You can also use the oily or waxy polish pads (depending on the finish of the shoe), which are already pre-loaded with polish. Apply polish in the same circular motions until the leather is soft and pliant. The leather should have a soft sheen but not look oily or greasy. If it does, you have applied too much polish. Get a clean cloth and remove excess polish, buffing in circles.

Use a clean dry cloth to go over the surface of the leather and buff in small circles. To store damp shoes or boots, stuff them with clean dry newspaper and dry away from direct heat. Most styles have removable insoles. If so, remove these before stuffing with newspaper and let them air out for fastest dry time and odour control.

Once the shoes are dry, remove the newspaper and replace the shoe insoles.

Most recent

×