How to Adjust the Band on a Pulsar Analog Watch

Written by martin adamovic | 13/05/2017
How to Adjust the Band on a Pulsar Analog Watch
Adjusting the band on a Pulsar analogue is simple. (Watch image by Aqeel Ahmed from

Whether you just purchased your Pulsar analogue watch or you have had it for years, it is likely that there will come a time when you need to adjust the band. Adjustments to the watch band are most commonly made to change the way the watch fits, but they can also be used to tighten or loosen the band according to personal style preferences.

Measure the watch band. Put the watch on your wrist and evaluate how many links need to be removed from the band.

Position the watch facedown on a flat surface. On the back of the watch you will see an arrow indicating the direction in which you must push the pins to remove links from the band.

Remove the pins from the links you wish to remove. At the point where the extra links need to be removed to make the watch fit, use the flathead screwdriver to push the pins in the direction of the arrows. You may need to use pliers to remove the pins completely.

Repeat this process to remove any additional links from the Pulsar band.

Things you need

  • 1mm flathead screwdriver
  • Flat-nose pliers

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.