How to Make a Resin Doll

Written by tammy domeier
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make a Resin Doll
Make a custom resin doll using clay. (singing dolls image by Lucy Clark from Fotolia.com)

Resin dolls are first modelled from clay, set into a mould and then cast using synthetic resin, which is often easier to paint than dolls made with vinyl. Resin feels like porcelain but is less brittle. Making your own resin doll allows you to customise your doll according to your own specifications. With resin dolls, you have the option of creating a ball and joint articulated doll with extremities that can stand on its own. With epoxy resin dolls, you can modify existing parts by sanding the resin and reshaping the part by adding epoxy putty.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Sulphur-free moulding clay
  • Silicone rubber and catalyst
  • Utility knife
  • Metal or wood mould box
  • Small scale
  • Rubber gloves
  • Face mask
  • Resin and hardener

Show MoreHide

Instructions

  1. 1

    Draw a design for your doll on graph paper and use modelling clay to build the doll. If you are building a ball and joint doll, you will want to design the feet and hands separately from the body and create different moulds for the articulated appendages.

  2. 2

    Cut your mould into two parts; it is often best to cut on the back of the model so that a seam is unnoticeable on the doll's face.

  3. 3

    Place a moulding box that is twice the width of the doll onto a level surface and add a layer of moulding clay that will sufficiently cover your model, then press your model into the clay.

  4. 4

    Measure the silicone rubber and catalyst on a small scale and mix the silicone rubber with the catalyst according to the directions (often it is a 1:1 volume ratio).

  5. 5

    Pour the silicone rubber onto the mould and allow it to dry for 24 hours.

  1. 1

    Apply rubber gloves and face mask, then mix an equal amount of resin and hardener. Mix together using a wooden stick.

  2. 2

    Strap the two mould halves together using a rubber band and pour the resin mixture into the mould.

  3. 3

    Remove the part after waiting for the resin to set the required amount of time (most set within 30 minutes). Now you can trim and sand the part, then paint the model according to your specifications.

Tips and warnings

  • You can also buy doll-making kits with clay models already made. These kits often include wires for putting together dolls with articulated joints, acrylic paint and even hair.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.