How to Reset the Drum Count on an Oki ES3640

Written by william garmany
  • Share
  • Tweet
  • Share
  • Email

The Oki ES 3640 is a full function colour laser printer and copier. The drum often ends up lasting longer than the expected life cycle. Life cycle programmed into the machine is calculated by a specific page coverage around five per cent. When drums don't wear out quickly, it saves on cost to keep using the same drum. Resetting the drum count accomplishes this purpose, allowing you to use this office expense elsewhere in your organisation.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Oki ES 3640 imaging drum reset kit

Show MoreHide

Instructions

    Kit

  1. 1

    Purchase a Oki ES 3640 Drum Reset Kit. These can be purchased and ordered online.

  2. 2

    Follow the included illustrated instructions for resetting the drum.

  3. 3

    Print more pages. The drum reset kit can be used eight times, saving you up to £975.

    Manual Reset

  1. 1

    Push and hold the up and down menu buttons while turning on the Oki ES 3640.

  2. 2

    Scroll to "Engine Dialog Mode" and push "Enter." The screen will display "Diagnostic Mode xx.xx.xx S-Mode."

  3. 3

    Scroll to "NV-RAM- Initial Table 1." Push the "Online" and Enter" buttons at the same time and hold for 10 seconds.

  4. 4

    Restart the printer when you see "Executing Reset." Toner, drum, fuser and transfer figures will all be set to 100 per cent.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.