How to Replace a Turn Signal Bulb on a Honda Goldwing

Written by daniel valladares | 13/05/2017

The turn signal bulb on a Honda Gold Wing is an important safety device. If it goes out, it should be replaced as soon as possible. Replacing the turn signal bulb on your Gold Wing is a simple job that only requires the use of a screwdriver and a replacement turn signal assembly. The entire process takes only a few minutes to complete.

Turn off the motorcycle's engine.

Remove the mirror trim off the headlight by unfastening the screw on each side of the black trim under the windshield garnish with a Phillips head screwdriver. Pull the trim off to allow access to the turn signal.

Remove the screw securing the turn signal assembly to the headlight. Pull the turn signal assembly off the vehicle.

Install the new turn signal assembly and reinstall the screw to secure it to the motorcycle.

Reattach the trim to the headlight and fasten the screws on both side.

Things you need

  • Phillips screwdriver

Show MoreHide

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.