How to remove your skin tag with dermatend remover treatment

Written by michelle benningfield
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to remove your skin tag with dermatend remover treatment
DermaTend is an all-natural wart, mole and skin tag removal product. (Skin care. Beauty. image by Monika 3 Steps Ahead from

No one likes having blemishes on their skin and skin tags can make even the most confident person feel ugly. DermaTend is an organic herbal wart, mole, skin tag remover product that can be used safely in your own home. It will not damage the skin surrounding the skin tag and also works on moles and warts. In approximately ten days, DermaTend will remove a skin tag and is less likely than other methods to cause scarring; however, some minor scarring may occur. DermaTend should not be used on moles or skin growths that your dermatologist suspects is cancerous.

Skill level:

Other People Are Reading

Things you need

  • DermaTend
  • Emery board or pumice stone
  • Wash cloth
  • Hot water
  • Soap
  • Towel
  • Bandage

Show MoreHide


  1. 1

    Scratch the surface of the skin tag with an emery board or pumice stone. Don't scratch until you bleed, but scratch hard enough that the DermaTend can soak into the skin tag. Be careful to avoid scratching the healthy skin around the skin tag.

  2. 2

    Cleanse the area with soap and hot water. This will help open the pores of your skin so the DermaTend can penetrate. After you have cleansed the area, dry it thoroughly with a towel. Any remaining water will block the DermaTend from soaking into the skin tag.

  3. 3

    Take the cap off the DermaTend tube. Remove the seal, replace the cap, and massage the DermaTend tube, to ensure it's mixed well. After massaging the tube, remove the cap again and squeeze a tiny amount of DermaTend on your finger. Rub the DermaTend into the skin tag. Avoid getting it on the healthy skin surrounding the skin tag. If you would like, to protect the healthy skin, you can rub the DermTend healing balm on the skin surrounding the skin tag.

  4. 4

    Wait for 20 to 30 minutes after application for the medicine to work. You should feel a stinging sensation. If your skin does not sting some then the medicine is not working and you will need to re-scratch the surface. Some redness around the skin tag is normal. The stinging sensation should last no longer than ten minutes. Wash the area again with hot water and soap.

  5. 5

    Apply a bandage over the skin tag and wait for a scab to form. If a scab does not form within 24 hours, you will need to repeat all the above steps until a scab does form. When the scab forms, do not pull it off. Allow it to fall off naturally in order to avoid scarring.

Don't Miss


  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.