How to Install Halo Angel Eyes Projector Headlights on an E46

Written by alibaster smith
  • Share
  • Tweet
  • Share
  • Email

Installing angel eye projector headlights in your BMW E46 can be done when the old headlights fail or if you want to change the look of your BMW's headlights. Angel eye projector headlights are special aftermarket projector headlights. Unlike factory-issued headlights, which scatter light against a reflective backing in the headlight housing, angel eye headlights use the standard projector beam to deliver a focused beam of light. The "angel eye" of the headlight assembly is simply a brand and particular style of projector headlight.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Cross point screwdriver

Show MoreHide

Instructions

  1. 1

    Open the bonnet and remove the screws that hold the factory headlight assembly in place with a cross point screwdriver. These screws are located on the backside of the headlight housing.

  2. 2

    Pull the headlight housing forward.

  3. 3

    Unplug the electrical connector from the back of the headlight ballast.

  4. 4

    Continue pulling the headlight assembly forward to remove it from the vehicle.

  5. 5

    Slide the angel eye projector beams into the frame where the old headlights were.

  6. 6

    Connect the electrical power connector to the headlight ballast.

  7. 7

    Thread and tighten the mounting screws to secure the new angel eye projector headlight assembly in place.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.