How to Install a Harris Bipod

Written by eric cedric
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Install a Harris Bipod
A Harris Bipod adds stability to the rifle when shooting or hunting. (David De Lossy/Digital Vision/Getty Images)

If you hunt or target shoot consider adding a Harris Bipod to the rifle stock. Harris Bipods use two telescoping legs to provide a stabilised pivot point for more accurate shots. Harris Bipods are designed to go on fast and easy with no hand tools needed. Most rifles have a screw point for bipods and tripods on the underside of the stock. If yours does not, use one of Harris Bipod's adaptors to secure the device to your rifle.

Skill level:

Other People Are Reading

Things you need

  • Bipod rifle adaptor (optional)

Show MoreHide


  1. 1

    Unscrew the Harris Bipod dial in the centre of the unit. Turn it counterclockwise to open the retaining jaws and expose the retention screw.

  2. 2

    Align the Harris Bipod retaining screw with the screw fixture under the rifle stock. Turn the screw dial to secure it into the rifle stock. Once tight, turn the jaw dial clockwise to tighten the Harris Bipod retaining jaws around the rifle stock as a secondary retaining point.

  3. 3

    Slide a Harris Adapter for your rifle (available through Harris Bipods by providing your rifle size and stock size) two-thirds the way up the stock toward the barrel. Tighten the adaptor jaws onto the stock via the tightening dial.

  4. 4

    Screw the Harris Bipod retaining screw to the adaptor screw receiver and tighten the bipod jaws to the rifle stock.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.