Assembly Instructions for a Mainstays Bookcase

Written by lynn rademacher | 13/05/2017
Assembly Instructions for a Mainstays Bookcase
Mainstay bookcases are made of pressed particle board. (livres image by Claudio Calcagno from

Mainstay is a brand of furniture marketed by Wal-Mart. The furniture comes in boxes that are complete with all of the hardware required to assemble the product. Bookcases are sold in a variety of sizes with each model having three or five shelves. The process for assembling a five-shelf bookcase by Mainstay is the same as a three-shelf bookcase. The assembly of a Mainstay bookcase can be completed with just a few basic hand tools and the Mainstay hardware included in the kit.

Lay out the pieces of the bookcase. Look at the edges of each piece. Three edges of each piece will be unfinished and one edge will be finished. This side indicates the back of the book case.

Locate the left side piece of the book shelf, which is usually labelled with an "A." Find the locking turn nuts in the hardware bag. These nuts are round and have an "X" on one side for a Phillips head screwdriver.

Use a hammer to pound the locking nuts into the four holes on the inside of panel "A" and panel "B."

Locate the locking bolts in the hardware bag. There should be eight of them and they look similar to metal pins that are flat on one end and have a groove on the other end.

Use the hammer to pound the flat end of the metal pins into the four predrilled homes on pieces "C" and "D," which are the top and the bottom of the bookcase.

Insert the exposed part of the pins from piece "D" into the bottom of piece "A." The pins will slide into the locknut. Use the screwdriver to turn the locknut and secure the pins in place. Repeat this process for piece "B."

Place piece "C" onto the top of "A" and "B" and turn the locknuts to secure the piece in place.

Locate the shelf supports in the hardware bag and place them at the desired height in the holes on the inside of the sides of the bookcase.

Slide the shelves on to the installed supports.

Things you need

  • Phillips screwdriver
  • Hammer

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.