How to Make Homemade Landscape Edging

Written by faith mcgee
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make Homemade Landscape Edging
Spread mulch inside your edging as additional protection against weeds. (garden rock border image by Jim Mills from Fotolia.com)

Landscape edging is an effective way to keep grass from invading garden beds or ornamental flowers from expanding to the lawn. In addition, gardeners can provide a clean uniform look by creating straight edges or achieve a whimsical aesthetic by building edging that curves around and follows the natural terrain. Numerous landscaping material can be found right in the yard, such as rocks, blocks or leftover bricks from the home. Any material you choose will contribute its own design element to the yard.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Stakes
  • String
  • Measuring tape
  • Half moon edger
  • Level
  • Rocks
  • Pre-emergen herbicide

Show MoreHide

Instructions

  1. 1

    Drive a stake at the beginning of the proposed edging pathway. You can create edging to border driveways, pathways, garden beds and around trees. Press stakes every foot along the pathway. Tie a string to each of the stakes.

  2. 2

    Straighten the stakes or move them to follow the couture of the yard. When creating edging around trees or shrubs, keep the edging a few inches outside of the plant's dripline in order to not impede the roots or allow grass near the plant. The dripline is the area directly underneath the tips of the plant's branches.

  3. 3

    Measure the string to find out how much edging material you will need to gather. Take measurements of the edging material that you want to use. Determine how high you want to make your edging and how far deep you want it to reach. Numerous commercial edging types typically go 6 inches deep into the ground to keep grass roots from growing under the material.

  4. 4

    Dig a trench that is twice the width of the garden edging and 6 inches in the ground with a half moon edger. Follow the proposed edging pathway. Flatten the bottom of the trench and make sure that it is even with a level.

  5. 5

    Place the edging material in the trench. Use a spade to tightly compact the soil around the edging material. Butt the edging material against each other. Add more edging material, such as rocks, according to how high you want your border. The edging material will sink into the ground over time; therefore, leave at least half an inch above the ground.

Tips and warnings

  • Spray the trench with a pre-emergent herbicide to prevent weeds from growing in between the edging material.
  • Store edging material in case it becomes damaged or you want to create another border.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.