How to use rubber bands on downriggers

Written by daniel ray
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to use rubber bands on downriggers
Downrigger set-up (All images and illustrations by Daniel Ray)

Rubber bands work great for attaching your fishing line to the downrigger. In addition to being easily adjusted for different breaking strengths, they produce consistent hookups and are also inexpensive. Rubber bands and downriggers have been used together since downriggers were invented. Though there are many styles of mechanical releases, it is hard to beat a rubber band's simplicity and dependability. Follow the steps below to tie two different types of rubber band knots.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Size 16 and size 32 rubber bands
  • Heavy monofilament or braided line
  • Larger snap swivels

Show MoreHide

Instructions

    How to Use Rubber Bands on Downriggers

  1. 1

    Before tying the rubber band to the fishing line, make up some small jumpers to run from the lead ball to the rubber band. Use about 2 feet of heavy monofilament or braided line and tie on or crimp a snap swivel on each end. Using the snap swivels will make the rigging easier and faster. See Step 1 illustration.

    How to use rubber bands on downriggers
    Jumper illustration
  2. 2

    Grasp one end of the rubber band between the left thumb and forefinger. Grasp the other end of the rubber band with the right thumb and forefinger. Begin wrapping the rubber band around the main fishing line at the spot where you want to attach the line to the lead ball. Pinch the rubber band with one hand to hold the loops in place as you wrap. See illustration Step 2.

    How to use rubber bands on downriggers
    Step 2 illustration
  3. 3

    Make 5 wraps with the rubber band around the main fishing line. Stop at this point if want a stronger breaking point for the release. Using one of the jumpers made in Step 1, snap one end to the lead weight and then attach both loops of the rubber band to the other snap. See illustration Step 2.

  4. 4

    Run one of the rubber band ends through the loop formed by the other end of the rubber band. Cinch down tight so that only one end is left. See illustration Step 4. This knot will have a lighter breaking point than using both rubber band ends as described above.

    How to use rubber bands on downriggers
    Step 4 illustration
  5. 5

    Use size 16 rubber bands when fishing for smaller fish with lighter line. Try size 32 rubber bands when trolling in deep water or using heavy line for big fish. Experiment with the two styles of knots to get the breaking strength desired.

Tips and warnings

  • Store rubber bands out of direct sun to prevent deterioration.
  • Use caution when working with hooks.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.