Bricklaying techniques

Written by billy mccarley
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Introduction
  • Introduction

    Bricklaying techniques

    Bricklaying was once considered a trade that only a well-established bricklayer could perform. However, over the years, beginners willing to invest a small amount of time learning basic bricklaying techniques have also started practicing it. These techniques can be implemented in a few hours and mastered in a few weeks.

    Bricklaying requires a number of useful techniques. (Christopher Furlong/Getty Images News/Getty Images)

  • 1 / 4

    Mortaring

    To lay bricks correctly, you must spread cement mortar in a mud bed with a trowel, as well as smear it onto bricks so they bond together. This trowel is used to scoop up mortar from a mortar board and spread it out in a straight line into the mortar bed, which is 2 to 4 inches thick and 4 inches wide. The trowel is also used to smear mortar onto the ends of each brick before pushing the brick into the mortar bed and sticking it to other brick end to end.

    These bricks are pressed into a mortar bed and stuck together at each end joint with smeared mortar. (Ablestock.com/AbleStock.com/Getty Images)

  • 2 / 4

    Staggering

    Bricks are always staggered to increase the strength of the brick wall. To do this, each brick row is installed so that the end of each brick lands in the middle of the prior brick row bricks. This is called a "running bond brick pattern." Although there are other patterns, such as Flemish bond where the bricks alternate between whole and half bricks, all patterns stagger to increase the brick's structural integrity.

    These brick courses are all staggered. (Jupiterimages/Photos.com/Getty Images)

  • 3 / 4

    Levelling

    Bricks must always be levelled along the length of the brick, as well as across the brick. After the brick structure has reached 4 feet tall, it must be plumbed as well. Generally, bricks are laid out three or four at a time along each individual course or brick run and levelled with a 4-foot level. If the bricks are unlevel, then tapping the level with the handle of a mason's trowel will help set them level.

    These bricks are levelled horizontally. (Tim Boyle/Getty Images News/Getty Images)

  • 4 / 4

    String Reference

    When laying a larger number of bricks at a faster pace, masons use a nylon string and line blocks. Two ends of the brick structure must be constructed first to have a surface onto which to hook the line blocks. The nylon string is attached to the two line blocks, one at each end of the wall, and stretched along the wall project. By placing the string at the top of each brick on each end of the wall, you can follow the string when laying along the wall, which will allow you to lay them straight and level.

    The nylon string and line block are attached to this brick wall project. (Adam Rountree/Getty Images Entertainment/Getty Images)

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.