How to Make Butterflies With Soda Cans

Written by miranda brumbaugh
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make Butterflies With Soda Cans
Turn your trash into art by using the aluminium for craft projects. ( Images)

Instead of tossing your used soda cans in the garbage or recycling bin, consider making a piece of art out of the aluminium. The thin metal is malleable and can be transformed into butterflies with a few tools and an hour's worth of work. The result is a soda can butterfly that is light enough to move in a gentle breeze. Give your butterfly realistic details by gluing on embellishments or with paint, or leave the shiny metal surface as it is.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Aluminium can
  • Tin snips
  • Protective gloves
  • Paper or card stock
  • Pencil
  • Scissors
  • Fine-point marker
  • Hammer
  • Nail
  • 1/2-inch long flat oval bead
  • Hot-glue gun with hot-glue sticks
  • Rhinestones (optional)
  • Fishing wire (optional)

Show MoreHide


  1. 1

    Wash the aluminium can with hot soapy water. Rinse the can thoroughly and shake it to drain most of the water. Dry the can thoroughly by flipping it upside down in a dish rack or on a towel. Put on a pair of protective gloves.

  2. 2

    Place the can on its side. Cut through the aluminium with a pair of tin snips and remove the top and bottom so all you have left is the single smooth inner ring. Cut the tube of aluminium down the centre so you have one rectangle of aluminium. Leave the slight curvature in the aluminium.

  3. 3

    Draw a butterfly shape that is approximately 4-by-4 inches on a piece of paper or card stock. Cut out the shape and place it on the nonprinted side of the aluminium. Trace around the butterfly with a fine-point marker. Cut the butterfly out of the aluminium with the tin snips.

  4. 4

    Stick the pointed end of a nail over the metal and hit it with a hammer to add embellishments. Make the holes go all the way through the metal or gently hit the hammer for a slight impression.

  5. 5

    Attach the oval bead down the centre of the butterfly on the unprinted side with a small amount of hot glue for the butterfly's body. Attach rhinestones with hot glue over the wings in a predetermined pattern or at random for embellishments. Bend the wings into even more of a natural curve after you finish decorating the butterfly, if desired.

  6. 6

    Apply hot glue in the centre of the backside of the butterfly and attach the end of a length of fishing wire to hang the butterfly, if desired.

Tips and warnings

  • Draw one butterfly wing from the paper or card stock and use that single wing for both sides of the aluminium butterfly by flipping it over and tracing it twice. This will give you a perfectly symmetrical butterfly.
  • Cut out a smaller butterfly and turn it into a broach by backing it with a pin.
  • Glue a magnet on the back for an office or refrigerator decoration.
  • Make miniature metal butterflies to use for crafting projects, jewellery pieces or scrapbook embellishments.
  • This project is not appropriate for children as they could cut themselves with the sharp edges of the can.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.