DISCOVER
×

Dyson Animal Troubleshooting

Updated March 23, 2017

The Dyson Animal is a canister vacuum cleaner. Specifically made to pick up animal hair, the Dyson Animal manoeuvres on a ball for greater ease of use. With a detachable head and telescoping wand, the Dyson Animal is a high-performance vacuum. However, if your Dyson Animal is not functioning properly, performing some troubleshooting steps may remedy your problem.

Unplug the vacuum from the wall.

Press the release button located on the bottom right side of the machine to release the filter housing.

Depress the button on the side of the filter housing to release the filter.

Remove the dirt canister from the machine and empty into a dustbin.

Open the filter housing, located where the canister sits on the vacuum, and remove the filter.

Wash both filters with cold water until the water runs clear.

Allow the filters to dry for at least 24 hours. When the filters are completely dry, replace them in the filter housings.

Unplug the machine and leave it off for at least one hour. The machine may have overheated.

Empty the dirt canister and clean both filters.

Examine the brush to ensure that no large items are keeping the brush from turning.

Warning

If the machine is making an unusual noise or emitting bad smells, discontinue the use of the vacuum immediately.

Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Based in Lakeland, FL., Heather Montgomery has been writing a popular celebrity parenting blog and several parenting and relationship articles since 2011. Her work also appears on eHow and Everyday Family and she focuses her writing on topics about parenting, crafts, education and family relationships. She is pursuing a Bachelor of Science in early education from Fort Hays State University.