How to configure quintum

Written by james stone
  • Share
  • Tweet
  • Share
  • Email

Configuring your Quintum Voice Over IP (VoIP) device makes use of the Tenor Configuration Manager application, which installed during the set-up of your gateway. With this application you can configure your Quintum product over a network using the IP address of the Tenor Gateway. The Quintum Configuration Manager runs on Windows 2000 and XP. The application works with the following Quintum models: DX, AX, AS, AF, BX, CMS, Call Relay SP and CR 60.

Skill level:
Moderate

Other People Are Reading

Instructions

  1. 1

    Click the "Start" button, "All Programs," the "Quintum" folder and then the "Tenor Configuration Manager" shortcut. The Address book of the Configuration Manager displays on-screen.

  2. 2

    Click the "Discover" button and the Local Tenor Discovery window displays on-screen.

  3. 3

    Click one of the "T1/E1 VoIP Gateways" and then the "Connect" button. The Specify Login and Password window displays on-screen.

  4. 4

    Type in a username and password (default is "admin"), then click the "OK" button.

  5. 5

    Click the "Launch Wizard" button and the "Next" button to continue.

  6. 6

    Click "ISDN" signalling, then type in your "ISDN Protocol" for your VoIP Gateway and configure any settings you wish to add.

  7. 7

    Click the "Next" button and a Summary of all the settings you entered displays on-screen.

  8. 8

    Click the "Accept" button to finish the configuration of your Quintum VoIP Gateway.

Tips and warnings

  • It is recommended to allow local access to your network through your computer's Firewall.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.