How to Carve a Wolf Hiking Staff

Written by mike marcoe
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Carve a Wolf Hiking Staff
You can use a photo as the basis for your wolf design. (Wolf image by Petra Kohlstädt from Fotolia.com)

Carving a wolf hiking staff is a creative way to both decorate a useful item and put your artistic skills to the test. The typical wood walking stick or hiking staff is between 5 and 6 feet long, depending on the comfort and height of the hiker. Carvers usually make walking sticks from a sturdy wood that is not too heavy or bulky, such as walnut or pine.

Skill level:
Easy

Other People Are Reading

Things you need

  • Pine or walnut stick
  • Wolf design
  • Regular transfer paper
  • 6 to 12 inches of sticky transfer paper
  • Wood-carving tool kit with gouge and scraper
  • Carving knife
  • Safety gloves

Show MoreHide

Instructions

  1. 1

    Draw, cut out or print a wolf design to carve.

  2. 2

    Trace the wolf pattern onto the regular transfer paper.

  3. 3

    Trace the wolf pattern from the regular transfer paper onto the sticky transfer paper. Peel off the back of the sticky transfer paper and adhere it to the area of the hiking staff that you plan to carve. Rub your hand over the top of the sticky transfer paper to generate enough heat so that the wolf design gets transferred onto the wood. Go over the design with a pencil or pen if necessary. Peel the sticky transfer paper off the wood.

  1. 1

    Cut out the inside thicker wolf face using a small- to medium-sized gouging tool and woodcarving knives.

  2. 2

    Cut out the outer fine lines of the fur and ear area using thin carving knives. Gouge out the ear area with a small- to medium-sized gouging tool.

  3. 3

    Go back over the face and outside areas as necessary to enhance the carved design and add depth. Using the sides of a larger wood scraper, smooth out sharp edges on the carved wolf design so that they blend in smoothly and don't have jagged or sharp corners.

  4. 4

    Finish carving the wolf in the hiking staff by adding fine details with smaller gouges and knives. Repeat the smoothing and blending process as described in Step 3 to finish the carving project.

Tips and warnings

  • Take your time. Use less finely detailed designs if this is your first woodcarving project.
  • Wear protective gloves in case the carving knives or gouges slip while you are carving the staff.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.