Shed floor using patio stones

Written by john walker
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Shed floor using patio stones
Avoid separation of the blocks by installing an anchored edging around the blocks. (Jupiterimages/Photos.com/Getty Images)

Cement pavers, or patio stones, offer a customisable appearance to a sturdy and stable pad. The paver or stone structure, if assembled correctly, offers as much stability as a standard cement pad. Erecting a patio stone base for a shed is a simple matter of building a block pad out of the stones and placing the patio on top of the pad. The stability of the pad comes from the use of a rock and dry cement subsurface with a plastic edging border.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Marking paint
  • Shovel
  • Tamper
  • Crushed gravel
  • Dry cement
  • Cement sand
  • 24-inch by 24-inch pavers
  • Rubber mallet
  • Level
  • Plastic edging
  • Ground anchors
  • Mallet
  • Masonry wet saw

Show MoreHide

Instructions

  1. 1

    Draw the outline for the dimensions of the shed on the ground using marking paint.

  2. 2

    Dig the area to a depth of 4 inches with a shovel. Make the base of the ground as level as possible. Compact the subsurface with a hand tamper, which is a long metal pole with a wide, square base and two handles on the side, by slamming the tamper into the ground around the surface of the hole. Mechanical tampers are available for rent from hardware stores and can accomplish the task quickly.

  3. 3

    Pour out 1-inch of crushed gravel into the area and tamp the gravel flat. Repeat with 1 inch of dry cement.

  4. 4

    Lay out the patio stones or pavers in the desired pattern starting with one corner. Place the second paver against the edge of the first but elevated off of the ground and drop the stone or paver into place. Set a level on top of the two pavers and check the level. Adjust as necessary by tapping the top of the pavers with a rubber mallet. Install the remaining pavers or stones in the same fashion.

  5. 5

    Wrap a plastic edging around the stones pressed tightly against the edge. Drive ground stakes into holes along the plastic edging to anchor the edging properly.

Tips and warnings

  • For additional stability and moisture control, sweep cement sand into the gaps between the stones and pavers. Scrub the surface of the structure with a wide-head broom to force the sand into the gaps. Wet the area down lightly to rinse the surface while solidifying the cement sand in the joints.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.