Instructions for a Blaupunkt CDC RF6

Written by whitney houston
  • Share
  • Tweet
  • Share
  • Email

The primary purpose of the Blaupunkt CDC RF6 six-disc CD changer is to allow you to listen to multiple CDs in your car without having to physically swap out discs. Upon installing your device, you may have several questions about how to use it. Following a few steps will have you operating your changer effectively and efficiently in little time. You can properly load discs into the changer magazine, insert the magazine into the changer, play a disc, change to another disc and set your changer to play a mix of songs.

Skill level:

Other People Are Reading


  1. 1

    Load discs into the changer by first holding the magazine (the device that holds the CDs) in your hands. Grab the tab on one of the six disc trays with your fingers. Pull it out and insert a disc with its playable side facing up in the direction of the printed arrow. Push the tray back into the unit by applying pressure to the tab. Repeat until all trays are full.

  2. 2

    Install the magazine inside the changer by first sliding the RF6 door open to the right. Position the magazine with its arrow facing up, away from you and towards the player. Insert the magazine into the player until it clicks into place. Close the door securely, so that no foreign debris enters the player.

  3. 3

    Play a disc by first starting your vehicle or turning on the battery. Press the "Play/Pause" button located on the mounted remote control. The display will show the disc number and song number as the music begins to play. Pause the play of a song or disc by pushing the "Play/Pause" button again. You'll see that play has been temporarily stopped on the display. Resume play by pushing the "Play/Pause" button again.

  4. 4

    Switch to another disc by pushing the "Disc Select" button (located on the mounted remote control). Move to the next disc by pushing the "Disc Select" button to the right side. If you wish to go back to the previous disc, press the "Disc Select" button to the left side. You will see the disc number appear on the screen.

  5. 5

    Press the "Mix" button to activate the "Song Mix" feature of your changer. You will see the word "Mix" appear on the display. The tracks on the currently playing disc will be played in a random order. Activate the "Disc Mix" feature, which plays songs from each disc in random order, by pushing and holding down the "Mix" button for two or more seconds. The words "Disc" and "Mix" will appear on the display, and the first disc will begin to play in random order followed by the following random disc.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.