How to Replace a Side Mirror Signal Light Bulb in a S430 Mercedes Benz

Written by daniel valladares
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace a Side Mirror Signal Light Bulb in a S430 Mercedes Benz
The side mirror signal light bulb is an integral safety component of your S430 Mercedes Benz. (Front-light of black mercedes image by Mladenov from

Unlike most vehicles that use bulbs for their signal lights, the Mercedes Benz S430 uses an LED light strip for the lights in its side mirrors. Although you won't have to purchase a new mirror to replace the light, the LED light strips are expensive and somewhat difficult to replace. You must take apart and remove the mirror from the vehicle using a flathead screwdriver and a Phillips screwdriver.

Skill level:

Things you need

  • Flathead screwdriver
  • Phillips screwdriver
  • Replacement LED light strip

Show MoreHide


  1. 1

    Push the side mirror up against the car as far as it can go. Do not break the mirror.

  2. 2

    Insert a flathead screwdriver underneath the mirror and pry out the clip holding the mirror housing in place. This will allow access to the inside of the mirror assembly.

  3. 3

    Remove the mirror assembly from the vehicle and place it on a level surface. Use a Phillips screwdriver to remove the two screws holding the old LED light strip in place.

  4. 4

    Snap the new LED light strip into the mirror assembly and reattach the two screws. Place the mirror assembly back into the mirror housing, making sure to connect the two centre inputs to the four-prong female connector located on the back of the mirror housing.

  5. 5

    Reattach the clip to secure the assembly to the housing. Test the lights. If they are not working, you may have connected the mirror improperly. Adjust the mirror if necessary.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.