How to Write Care & Content Labels for Garments

Written by b. maté
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Write Care & Content Labels for Garments
If a jacket is has two fabrics, list the predominant one first. (jacket image by dinostock from

The Federal Trade Commission (FTC) issued a rule in 1971 that all garment intended for resale must have care and content labels attached. This ruling was amended in 1984 to ensure that the care labels were not misleading. Manufacturers couldn't label a garment as being 20 per cent silk at the top of the care label (in big bold letters), and 80 per cent polyester at the bottom. Additionally, a clothing producer couldn't indicate that a dress is dry clean only, if it could be washed. Rules like these reduce customer confusion and false advertising.

Skill level:

Other People Are Reading

Things you need

  • Sample garments
  • Fibre content information
  • Textile testing facility

Show MoreHide


  1. 1

    Investigate the fibre content of garment's outer shell and lining fabrics. In the case of a jacket, the outer shell would be the outside fabric of the jacket, and the lining would be the inside fabric. Every fabric must be researched, as every fibre needs to be listed. If the outer shell has two fabrics, then both fabrics plus any linings must be investigated. A larger textile mill will provide this information on the fabric rolls or swatches. Smaller fabric merchants, called "Jobbers" by the industry, may not have the fibre information readily available. If this is the case, test the fabric either in house, or at a textile testing facility.

  2. 2

    Make a list of each fibre used in the outer shell. If there is more than one fibre used, as in a wool and acrylic blend, then place the fibre with the largest percentage at the top, followed by the second fibre (i.e., 65 per cent wool, and 35 per cent acetate). If the outer shell is made up of more than one fabric, then start with the predominate fabric. So in the same example, if a jacket is made of a wool and acrylic blend and has suede patches, start by listing all the fibres in the blended fabric, and putting suede as the last fabric on the list.

  3. 3

    List the fabric used in the lining after the fabric's outer shell's list is composed. Follow the same format used when listing the outer shell's fibre content, putting the fibre with the largest percentage first. Other materials in the garment's infrastructure, such as interfacing and thread, are not normally put on the content label. Additionally, care instructions are not always listed on the same label as the garment's content.

  1. 1

    Send the sample garments to a testing facility, where they will be tested for shrinkage, colour fading and any abnormal responses to washing and care. If a company is large enough, it might have an in-house facility that tests the garments by washing them at various temperatures. Other test include bleaching, ironing, and dry cleaning the sample garments. The results of testing will provide the information needed to draft the care instructions.

  2. 2

    Write the test results in short, terse phrases, specifying whether the garment should be hand washed, machine washed, and then the temperature, for example "Machine Wash, Cold" Or "Hand Wash, Warm." If the garment must be dry cleaned, then state "Dry Clean Only." The next instructions on the list would be if the garment can be bleached, followed by if it can be dried in a dryer and ironed. If performing an action will alter the garment, make sure to communicate that the customer should not do it, using clear wording, such as "No" or "Don't."

  3. 3

    State where the garment has been manufactured, not where it was designed. It is common that the clothing company that designed the garment is not located in the same country where it is manufactured. So if the design house is in New York, but the garment was made in Vietnam, the label would state: "Made in Vietnam."

Tips and warnings

  • These regulations govern the United States and therefore may not apply to other countries. If garments are intended to be exported to another country, it is best to investigate that country's label requirements, as it will be necessary to include them. It is common for garments sold internationally to have more than one set of content and care labels.
  • Care and content labelling is enforced by the Federal Trade Commission. Mislabeling or not including the proper label on a garment intended for resale could result in fines.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.