DISCOVER
×

My Citizen Eco Drive Watch Has Stopped

Updated April 17, 2017

Eco Drive watches from Citizens are unlike most other types of watches. Unlike the majority of other watches, these watches run primarily on power produced by sun exposure. Due to this brilliant concept, an Eco Drive watch does not require a new battery when it stops functioning, just a full recharge.

Clean the watch face. This will remove any dirt or smudge marks, which can block the watch from achieving full exposure from the sun.

Set the watch on a flat surface directly inside a sun-exposed window. Make sure the window is exposed to sunlight for multiple hours in a day.

Allow watch to sit watch-face up in the sun-exposed spot for 48 to 72 hours. You will see the watch begin to move after this time.

Reset the watch by pulling out the large wind notch. Twist the notch until the watch displays the correct time, and push the notch back into the watch. The battery is now fully charged.

Warning

Do not place the watch outside because rainfall and other weather can damage the watch permanently.

Things You'll Need

  • Glass cleaner
  • Soft cloth

References

Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Nicole Byerly has been writing since 2003. She has published multiple works that have appeared in "Campus Philly." Byerly is pursuing a Bachelor of Science in cybersecurity at Utica College.