How to Remove the Bezel From an Acer Aspire 6930

Written by matt koble
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Remove the Bezel From an Acer Aspire 6930
The Acer Aspire 6930s bezel can be removed fairly quickly. (Laptop image by Marek Kosmal from

If your Acer Aspire 6930 screen has a scratch, gash or otherwise needs to be replaced, you must first remove the bezel holding it in place. Located around your monitor, the bezel is the plastic edge that protects the screen and holds it in place. Bear in mind that there is another bezel holding the keyboard in place at the end of the keyboard closest to the screen, directly in front of the keyboard. While this one simply pops out by hand, the bezel holding the monitor in place requires a bit more work.

Skill level:

Other People Are Reading

Things you need

  • Phillips screwdriver

Show MoreHide


  1. 1

    Shut down your computer and wait for it to completely power down. Close the lid and remove any cords before flipping the Aspire 6930 onto its back. Remove the battery to help prevent electric shock and turn the computer over again. Open the screen so you can clearly see it and access the bezel surrounding it.

  2. 2

    Locate the screws holding the bezel into place. They are located on the front of the bezel, typically covered by protective plastic or rubber dots that peel off. Unscrew the screws and set them in a safe place.

  3. 3

    Gently push with your fingers between the bezel and your LCD screen's lower edge. After it begins to pop out, remove the bezel by continuing to loosen it completely around the edge of the screen. Be careful with the plastic, as it's easily breakable.

  4. 4

    Pull the bezel completely from the LCD screen once it's fully loose. Set it aside safely with the screws in a place where it won't get lost or damaged. After completing the task at hand, snap the bezel back into place and tighten the screws in a uniform manner.

Tips and warnings

  • Avoid damage caused by static electricity by touching a large metal object before handling electronic components.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.