How to Replace the Third Brake Light on a Chrysler Pacifica

Written by robert good
  • Share
  • Tweet
  • Share
  • Email

The Chrysler Pacifica is a large SUV with five doors. The brake lights are accessible through the trunk. All three taillights are replaced the same way. The brake light, revers light and turn light are all in the same housing fixtures that are located on the rear right and left side of the trunk frame. No tools are need to complete this job because the cover plate and light housing are secured to the frame by a screw tab.

Skill level:
Easy

Other People Are Reading

Things you need

  • New brake light bulb

Show MoreHide

Instructions

  1. 1

    Open the Pacifica's boot and locate the plastic screw tabs that are securing the plastic cover onto the frame and remove them by twisting the tab in a counterclockwise motion. Pull the cover off of the frame.

  2. 2

    Pull the light housing off of the frame using you hand and locate the third brake light. Pull the light bulb out from the fixture. Insert the new light bulb into the fixture and replace the housing to the frame.

  3. 3

    replace the plastic cover to the frame and replace the plastic tabs to the cover. Twist the tabs in a clockwise motion to tighten the tab securing the cover to the frame.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.