How to Install an Infant Car Seat in a Rav 4

Written by carl pruit
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Install an Infant Car Seat in a Rav 4
Connecting an infant car seat. (http://community.babycenter.com/post/a8780535/rav_4_latch_system)

Toyota Rav 4s feature a built-in latch system for installing and securing an infant car seat. The latch system works by placing the car seat in either the rear passenger-side seat or the rear driver's-side seat. The system is designed for easy installation and removal.

Skill level:
Moderately Easy

Other People Are Reading

Instructions

  1. 1

    Locate the latch hooks in your Toyota Rav 4 on the bottom of the seat back, behind the rear seat.

  2. 2

    Place the infant car seat in the rear passenger seat. Position the back of the seat against the back of the passenger seat. Verify that the infant seat is flat and secure on the passenger seat.

  3. 3

    Attach the infant car seat tethers to the Rav 4 anchors on the back of the rear passenger seat. Tighten the tethers by pulling the slack out of the straps, through the buckle on the tether.

  4. 4

    Attach the upper tether of the infant car seat to the hook located behind the passenger seat on the Rav 4's interior door jamb. The upper tether hook is even with the passenger seat.

  5. 5

    Pull back on the infant car seat to verify that it is attached securely before placing your baby in the seat.

Tips and warnings

  • Only use a federally approved and inspected infant car seat.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.