Probably one of the most ignored light bulbs in any vehicle are the brake lights. Indicators might blink rapidly when you engage the directional switch, telling you that a bulb is out in the front or rear, but most vehicles offer no warning signs when a brake light burns out. You can't step on the brake pedal and see if your brake lights are working at the same time. Someone will alert you sooner or later, hopefully before a police officer pulls you over and cites you. Changing the brake light bulb in a Kia Sportage is relatively easy and you can save some money on labour charges at service stations.
- Skill level:
- Moderately Easy
Other People Are Reading
Things you need
- Phillips head screwdriver
Place an assistant in the Kia Sportage and have him run through all the lights while in it.
Open the rear gate door.
Using the brake light assembly as a guide, look at the metal rail of the door on the side. You will see two seated screws. Remove them using the Phillips head screwdriver.
Stand on the outside of the brake light assembly and pull it out gently but firmly. The lens is not released by the two screws, but still affixed by a ball socket on the inside moulding.
Turn the brake lamp socket at the back of the lens assembly to the left to release. Extract the socket and remove the bulb by also twisting a half turn to the left while pushing in slightly on it.
Insert the new bulb, twisting a half turn to the right while also pushing it slightly inward.
Have your assistant step on the brakes again to test the bulb.
Insert the socket back into the lens assembly and twist a half turn to the right.
Line up the ball socket and snap the assembly into place.
Reinsert the screws and close the door.