Loading ...

How to Replace a Skagen Watch Battery

Updated November 21, 2016

Skagen Denmark Collections is a company that creates jewellery, clocks, sunglasses and watches with designs that are meant to be clean and elegant, according to Most Skagen watches retail between £65 and £97 and can be found at major department stores and general retail stores. Replacing the watch battery in a Skagen watch requires the use of a small, flat screwdriver, such as one used for eyeglass repair.

Loading ...
  1. Turn the watch over to determine what case back the watch has. A snap case back is smooth with a small notch on the side. A screw back has two or more small slots on the back.

  2. Wriggle the blade of the screwdriver slightly underneath a snap back case at the notch to remove the case back.

  3. Turn the blade of the screwdriver in the slots on a screw back case to remove the case back.

  4. Unscrew or lift the clip holding in the watch battery.

  5. Return the clip to the original position after replacing the watch battery.

  6. Set the case back on the watch. For a screw back case, use the screwdriver to turn the notches and secure the case back. Line up the notch on a snap back and press the case back gently to pop it into place.

  7. Reset the watch if necessary.

  8. Tip

    If you experience any difficulties, take the watch to an authorised watch repair store for assistance.

Loading ...

Things You'll Need

  • Skagen watch
  • Small standard screwdriver

About the Author

Meredith Jameson writes early childhood parenting and family health articles for various online publications. She holds a Bachelor of Arts in history from San Francisco State University.

Loading ...