Polyresin crafts

Written by jenny harrington Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Polyresin crafts
Coffee beans and paper sealed in polyresin.

Resin comes in two forms for the home crafter: polyester resin or polyurethane epoxy resin. Both are plastic and often referred to as polyresins. Use polyresins for jewellery, paperweights, magnets and other small craft projects. The glasslike appearance of the harden resin is suitable for embedding objects permanently to make attractive displays.

Choosing a Resin

Polyester resin is perfect for larger projects. Pouring depth must be at least 1/2-inch in order for the resin to cure properly. Use it for paperweights, diorama designs, cabinet pulls or other deeper moulds. Polyester resin does not harden on the side exposed to air so a resin spray or sealing agent is necessary to cure the open side of the mould completely. Polyester resin is more susceptible to surrounding humidity and may take up to 3 days to harden completely. It is more forgiving than epoxy resins---a sealing agent will cover any small blemishes in the finished item.

Epoxy or polyurethane resins are most often used for jewellery and other projects requiring a depth of less than ½ inch. Epoxy cures to a rock hard finish throughout within 24 to 36 hours at room temperature. It is well suited to coating and sealing objects, such as tabletops or the surface of pendants. It doesn't emit the strong fumes like polyester resins do. Both types of resins are available at craft stores.

Moulding Polyresins

Purchased resin moulds work with all types of resin as long the depth is correct. Made of lightweight plastics moulds come in a variety of sizes and shapes. Substitute silicone and rubber moulds, such as ice cube tray or baking pans, for store-bought resin moulds. Use plastic food storage or other containers with polyester resin. Making your own moulds with latex or silicone is another possibility. Always use a mould release spray if the mould is not specifically made for resin crafts.

Instead of a mould fill objects permanently with resin. Bottle cap and mint or candy tin dioramas are two options. Lockets and jewellery bezels work if there are no gaps between the frame and backing for the resin to leak from. Place a thin coat of epoxy resins on top of metal or wooden shapes or objects to add a glasslike seal.

Embedding Items

Polyresin is valued most for embedding work. Any object can be embedded and sealed within resin. Non-porous items need no preparation before embedding. Plastic and metal charms, shells and beads are examples of non-porous objects.

Porous objects include paper, dried flowers and fabric. Seal porous objects before embedding with découpage glue or a spray sealant. Let dry completely before using.

Fill your mould halfway and let the resin cure for 30 minutes to 1 hour. Place the object inside the mould then continue filling the mould to the top. Let cure for the specified time. For flat or sealed projects attach the embedding object to the base with découpage glue and let dry. Spread a thin coat of resin on top and let cure.

References

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.