Cheapest Ways to Build a Pond Screen

Written by andrew leahey
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Cheapest Ways to Build a Pond Screen
A pond screen will help keep your aquatic plants safe from animals. (Stockbyte/Stockbyte/Getty Images)

Pond screens are useful to keep falling leaf litter and other debris out of your pond towards the end of the season. Throughout the year it is often used to protect fish and expensive aquatic plants from predation by wildlife. When building a pond screen the best way to keep cost down is to source your materials from big-box or home improvement stores, and to do the construction yourself. Larger ponds with unique shapes will cost exponentially more when professionals are hired to size and design your screen.

Other People Are Reading

Screen Frame

A simple pond screen frame can be constructed from PVC tubing. PVC is lightweight, durable, and waterproof. It can also be painted to match the area around your pond and minimise the frame's visibility. Pick up enough straight PVC tubing material, and PVC glue, along with the necessary elbows to make the turns and transitions around your pond. Dry fit the whole frame together and place it around your pond prior to gluing any of the pieces. If you want to be able to take the frame apart for storage, opt for drilling and bolting the PVC tubing to the elbows.


Screen can be easily replaced, and thus you should not spend too much on it. A season or two will leave it filled with leaf litter and debris, as well as stretched out and in need of replacing. Look for screen material intended for rescreening window screens in your local home improvement store. If you cannot find a roll that will cover your frame in one piece, two or more strips can be laid next to each other and sewn together using a needle and fishing line. Secure the screen by wrapping it around each end of the PVC frame and screwing it to the PVC using a screw with a washer, with one placed every 6 inches around the circumference of the frame.

Stakes and Tie-Downs

Secure your pond screen around your pond to keep it from lifting up and away in a storm. This can be done cheaply, though not attractively, using a few bricks on each corner. If you want to make your screen look somewhat less unattractive you can use tent stakes and zip-ties. Hammer the stakes in to the ground and secure them to the pond frame using the ties.

Notes on Construction

Be sure that your screen does not sag below the waterline when your cover is placed over your pond. This can prevent fish from surfacing for air, and cause them to drown. If your screen does sag, replace the screening, tighten it up, or raise it up by placing bricks or pond stones under the frame. After a season or two, the screening will sag and begin to fray, replace it immediately. If animals such as raccoons are especially bothersome in your area, you can replace your screening with wire mesh for more security, though with added material cost.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.