How to Make a LEGO Bus

Written by jonra springs
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make a LEGO Bus
The Lego City Corner set includes a toy bus stop and bus. (Hemera Technologies/ Images)

LEGO® building blocks allow children to explore imaginary play scenarios with small scale representational models of vehicles and buildings. The first task is assembling Lego vehicles and accessories that come in a play set. The Lego City Corner set includes a bus and a metropolitan bus stop. The bus building instructions are detailed step-by-step pictorial directions. These instructions show the exact procedures for snapping on each of the pieces used for building Lego buses and bus stops.

Skill level:

Other People Are Reading

Things you need

  • LEGO® City Corner set

Show MoreHide


  1. 1

    Use a smooth flat surface for building Lego buses and accessories. The toy maker suggests using a table top as opposed to a carpeted floor. Use the pictorial bus building instructions as a reference for the sizes and placement of individual pieces.

  2. 2

    Snap the raised bump sides of Lego blocks into the open undersides of other Lego blocks to connect them. Use the blocks, slabs, windows and other special pieces for assembling Lego vehicles. The Lego bus provides room for a driver and passenger included in the set.

  3. 3

    Create the base platform with three flat dark grey slabs. Connect the various sized slabs with dark grey plank ribs. Add the individual axle blocks, the light grey flooring slabs, wheel wells and front and back bumpers and lights. Snap in the seat bases and all pieces of the lower bus walls.

  4. 4

    Snap the red seats on the seat bases. Put the steering wheel on in front of the forward seat for the driver. Place the windows on over the lower walls. Build the two black window dividers between the windows on the side of the Lego bus with no doors. Affix the advertisement and bus line stickers to the white headers. Place the headers on over the window tops. Snap the clear doors into the door frames and snap in place in the long door openings.

  5. 5

    Put the roof supports on over the headers. Snap the side mirrors onto the clamps at both sides of the windshield header. Put the driver and passenger into seats through the top opening of the Lego bus and snap the yellow roof slabs and racks on over the top.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.