How to Drain a Beko Dishwasher

Written by nathan mcginty
  • Share
  • Tweet
  • Share
  • Email

Beko appliances are primarily aimed at the European and UK marketplace. Its line of dishwashers features both full-sized and slim models. As with other dishwashers, Beko models need somewhere to drain their water when they have finished washing the dishes inside. You can drain a Beko dishwasher by hooking up the drain hose to the nearest drain inlet, usually a sink tailpiece or sewer inlet pipe.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Power drill
  • Spade bit
  • Sandpaper
  • Cable tie
  • Hose clamp
  • Screws
  • Screwdriver

Show MoreHide


  1. 1

    Unplug the Beko dishwasher or turn off the electricity for the dishwasher at the main circuit breaker.

  2. 2

    Plan the route for the Beko hose to the drain inlet. If the hose needs to be run through cabinets, drill an appropriate size hole with a power drill and spade bit. Sand down the edges with sandpaper to avoid damaging the hose.

  3. 3

    String the Beko dishwasher hose through any holes as needed over to the drain inlet.

  4. 4

    Connect the outlet at the end of the hose to the inlet on the tailpiece. Secure with a clamp.

  5. 5

    Hang the gooseneck part of the Beko drain hose over the drain inlet, if this is the type of hose your machine is equipped with. Secure with a plastic tie.

  6. 6

    Elevate the middle portion of the dishwasher hose so that it is higher than both the Beko outlet and the drain inlet. Secure the hose in place along a wall or the top of a cabinet with a hose clamp.

  7. 7

    Restore power to the Beko dishwasher.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.