LG manufactures many consumer products, from cellular telephones and televisions to washers and refrigerators. Most LG refrigerators have an automatic ice maker, along with an ice dispenser and water fountain built into the door. The water used for the ice maker and water fountain is obtained from a water supply valve, installed on the wall behind the refrigerator. To connect the refrigerator's water inlet valve to the water supply valve, you must purchase and install a copper water supply tube.
- Skill level:
- Moderately Easy
Other People Are Reading
Things you need
- Adjustable wrench
- Copper water supply line
Pull the refrigerator away from the wall and unplug the power cord from the wall outlet.
Place the compression nut onto the end of the copper tubing, followed by the ferrule.
Insert the end of the copper tubing into the water supply valve as far as it will go.
Hold the line in place and tighten the compression nut using an adjustable wrench to secure the lines to the valve.
Place the end of the line in a bucket and turn on the water supply valve. Allow approximately one quart of water to flow through the line to flush the line and then turn off the valve.
Remove the plastic cap over the end of the refrigerator's water supply line.
Place the compression nut onto the other end of the copper tubing, followed by the ferrule.
Insert the end of the copper tubing into the refrigerator's water supply line as far as it will go.
Hold the line in place and tighten the compression nut using an adjustable wrench to secure the lines together.
Turn the water supply valve counterclockwise and inspect the line for leaks. Tighten as needed.
Plug the refrigerator into the wall outlet and then push the refrigerator against the wall.
Open the freezer door and turn the ice maker's power button to the "On" position.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for