How to set up a pod in cubase

Written by simon foden Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to set up a pod in cubase
Cubase lets you record and edit from your computer. (Digital Vision./Digital Vision/Getty Images)

POD is the brand name of a range of guitar effects units manufactured by Line 6. There are various types of POD, including floor-based effects units, rack-mounted effects and USB-enabled audio interfaces. All feature Line 6 amplifier modelling and effects technology. The POD USB audio interface is designed for line-level recording applications, such as routing the guitar directly into a software-based recording interface such as Cubase. Using a POD with Cubase eliminates the need for separate audio interfaces while delivering a range of digital guitar effects.

Skill level:
Moderate

Other People Are Reading

Things you need

  • USB cable
  • Instrument cable

Show MoreHide

Instructions

  1. 1

    Connect a USB cable to the USB port on the rear of the POD. Connect the other end of the USB cable to the USB port on your computer. On laptops, the port is typically located on the left-hand side. On desktop machines, the port is typically located either on the front or rear panel.

  2. 2

    Insert the installation disc into the computer disk drive. The disc will automatically play. Select "Install Drivers and POD Farm Software." POD Farm is the name of the software program that comes with the interface. When prompted, select "Next" and follow the subsequent prompts to complete the installation.

  3. 3

    Open up Cubase. Double-click the Cubase icon your desktop. If you don't have a desktop shortcut, click "Start," "Programs" and select Cubase from the list, if using a PC. If using a Mac, open the "Applications" folder and select Cubase from there.

  4. 4

    Click "Settings" on the top lefthand side of the Cubase interface. Select "Devices" from the drop-down menu. Select "POD USB Interface" from the drop-down menu. This assigns the POD USB audio interface as the primary audio interface. Cubase will automatically detect the POD interface from now on.

  5. 5

    Click "File" and select "New Track" from the drop-down menu. This opens up an audio track.

  6. 6

    Plug an instrument cable into your guitar, plug the other end into the quarter-inch jack on the front of the POD. There are two jacks on the front; one has a guitar icon next to it and one has a headphone icon next to it. Use the guitar jack.

  7. 7

    Play a note on the guitar. Observe the meter section of the Cubase interface. If the meter display flashes red, reduce the level of the audio interface signal by turning the "Output" dial on the top of the interface. Too much signal causes audio clipping, an undesirable form of distortion.

  8. 8

    Click "Plugins" on the Cubase channel strip. Select "POD Farm." This opens up the POD Farm interface in Cubase. Select your sound by clicking on the amplifier and effect icons. Adjust the volume by moving the virtual sliders with your cursor.

Tips and warnings

  • The interface is USB-powered, so you don't need a power supply.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.