How to Use an Oregon Electric Chain Sharpener to Sharpen a Stihl Chain

Written by steve stakland
  • Share
  • Tweet
  • Share
  • Email

Stihl brand chain saws require frequent sharpening to function at their best. A well-sharpened chain saw will be safer to use and will make working with the saw easier. You can sharpen the blade of your Stihl chain saw by hand or with an electric sharpener. One brand of electrical sharpeners is the Oregon, made by Blount. The chain grinders from Oregon are not hard to use, but sharpening your blade requires that each link must be done individually.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Work gloves
  • Wrench
  • Cutting stone
  • Stihl saw owner's manual

Show MoreHide

Instructions

  1. 1

    Put on work gloves to protect yourself from the sharp chain. Make sure the chain saw is turned off.

  2. 2

    Take the three retaining bolts off by unscrewing them with the wrench counterclockwise. The retaining bolts are located where the bar of your chain saw attaches to the engine.

  3. 3

    Pull the bar from the chain saw's engine. Remove the chain from the bar.

  4. 4

    Choose the proper cutting stone and the right depth and angle settings for your particular Stihl chain saw. These details will vary depending on what model you have. Consult your Stihl owner's manual to determine the right settings.

  5. 5

    Place your Stihl's chain saw blade on the Oregon's metal guide rails. Tighten the chain in the guide rails by using the hand knob at the bottom of your Oregon electric sharpener.

  6. 6

    Lower the Oregon sharpener's arm and set the grinding stone flat against the first chisel tooth of your blade. Turn on the sharpener and sharpen the first tooth. It will look shiny and be sharp to the touch when you are done.

  7. 7

    Loosen the rail guides and turn the blade over to sharpen the other side.

  8. 8

    Repeat this process with each of the individual links.

  9. 9

    Put the chain back on the chain saw and replace the bar.

  10. 10

    Screw the bolts back into place clockwise to tighten the bar.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.