How to make ribbon leis step-by-step

Written by jessica westover
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make ribbon leis step-by-step
Satin ribbon is pleated on a string to form the lei's "petals." (red ribbon v image by Mykola Velychko from Fotolia.com)

Ribbon leis can be made as an inexpensive substitute for fresh flower leis. Homemade ribbon leis make great accessories for luaus, BBQs or Hawaiian-themed parties. Made from non-perishable materials, they will last forever and can be kept as keepsakes for remembering events. Make ribbon leis to give as gifts to friends and family members. Layer two colours of satin ribbon to create a double sided lei with more dimension. Ribbon leis can be made to be worn around the neck, head, wrists or ankles.

Other People Are Reading

Things you need

  • Needle
  • Nylon thread
  • Table clamp
  • 30 metres (30 yards), 1.2 cm (1/2 inch) orange satin ribbon
  • 30 metres (30 yards), 1.2 cm (1/2 inch) yellow satin ribbon
  • Clothes peg

Show MoreHide

Instructions

  1. 1

    Cut a 225 cm (90 inch) length of nylon thread and insert one end into the eye of a needle. Pull the needle to the centre of the thread. Tie the thread ends together in a knot leaving a 5 cm (2 inch) tail. Clamp the tail to a table edge with a table clamp.

  2. 2

    Buy 30 metres (30 yards) of 1.2 cm (1/2 inch) orange satin ribbon and 30 metres (30 yards) of 1.2 cm (1/2 inch) yellow satin ribbon at a local craft store. Place one end of each ribbon colour together, shiny sides facing out.

  3. 3

    Insert the needle through the centre of both ribbon layers, 5 cm (2 inches) from the ends. Fold the ribbons over the needle and insert it 1.2 cm (1/2 inch) from the first point. Continue to fold the ribbons back and forth, pulling the needle through them every 1.2 cm (1/2 inch). You should be creating an accordion-like folds on the needle. Once the needle is full of ribbon, slide the ribbon down the string to the knot. Push the ribbon folds tightly together and place a clothes peg on the string to hold them in place.

  4. 4

    Continue to gather the ribbon in 1.2 cm (1/2 inch) pleats on the needle. Every time the needle is full, push the ribbon pleats down the length of the thread, and move the clothes peg in front to hold them in place. Once the remaining ribbon equals 5 cm (2 inches), stop threading it onto the needle. Tie a knot in the thread near the pleats to secure them in place.

  5. 5

    Hold onto the 5 cm (2 inches) of loose ribbon with one hand and begin twisting the ribbon folds counterclockwise with the other hand. Work your way down the length of the ribbon, twisting the pleats to form whorls on the string. Once you've reached the other end, unclamp it from the table top. Tie the two loose ribbon ends together in a square knot. Clip the loose threads.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.