How to Replace Worn Seat Padding in a Truck or Car

Written by tim anderson
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace Worn Seat Padding in a Truck or Car
Replace the padding in your vehicle chairs for added comfort. (Jupiterimages/Goodshoot/Getty Images)

The chair is one of the most crucial elements when it comes to your comfort while driving your car or truck. The chairs in vehicles are padded and covered with whatever finishing material your type of vehicle has, ranging from fabrics to leathers to canvases. Over time, the seat padding within your seat will wear out and you will need to repair the seats back to their original state for continued comfort. Replacing the seat filling allows you to customise the new level of padding and make your car or truck like brand new again.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Wrench set
  • Utility knife
  • Padding
  • Sewing kit or sewing machine (optional)

Show MoreHide

Instructions

  1. 1

    Refer to your owner's manual for exact specifications on how to remove the seats from your car or truck, which will vary vehicle to vehicle. Use a wrench from the set and loosen the bolts that hold the chair onto the mounting brackets. Remove the chair completely from the car or truck and set it in a clean, level place where you can work on it.

  2. 2

    Decide if you want to only replace the padding, or if you want to replace the padding plus replace the old material covering the seat. Pull the padding out of the affected area if you wish to preserve the existing material. Use the utility knife to make a cut along the length of the seat on that side to make room for the new padding. Cut the new padding to fit and slide it into place. Sew the material back together and reinstall the seat.

  3. 3

    Remove the seat from the chair assembly for your car or truck following the instructions on your owner's manual. Completely remove the old seat cover plus padding if it is in very bad shape. Measure new material using the old seat cover as a reference, and add a couple inches to each measurement to allow for inseams. Turn the material inside out and sew three of the edges together with the sewing machine. Turn the material right-side in and insert the seat padding. Sew the final edge with the sewing machine or by hand and reattach the seat to the chair assembly.

  4. 4

    Put the seat back into your car or truck. Reattach the entire assembly to the mounting rails on the floorboard and tighten the mounting bolts.

Tips and warnings

  • Different makes and models of vehicles will have different removal and installation processes for the seats. Refer to your owner's manual for exact specifications dependent on your make/model of car or truck. Otherwise the padding replacement process is the same regardless if you are talking about home furniture, boat cushions, table chairs, car chairs or otherwise.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.