How to make a metal chair

Written by michael monet
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a metal chair
Heat is required to work metal. (metal image by Andrzej Wlodarczyk from

You will need to practice many times to construct an attractive metal chair, but then again, you'll never get better if you don't try. Making a metal chair can be an interesting and challenging project for adults who can safely work with heat sources and welding tools. Start simple and work up to more complex designs as you become more skilled.

Skill level:

Other People Are Reading

Things you need

  • Graph paper
  • Pencil
  • Silver marking pen
  • Tape measure
  • Sheet metal
  • Rectangular metal tube
  • Abrasive chop saw
  • Grinder
  • Welder
  • Plasma cutter
  • 2 welding clamps
  • Thick gloves
  • Face mask

Show MoreHide


  1. 1

    Draw out the general design of your chair on graph paper, including dimensions. Keep your first metal chair as simple as possible, with four even legs, a seat and a back. Measure a simple chair that you have around the house for guidance.

  2. 2

    Measure four legs, and use the abrasive chop saw to cut each leg out of the rectangular tube. Cut four tabs out of the sheet metal that measure to the empty space on the top and bottom of your chair legs. Place the legs in a clamp to hold them steady as you weld the tabs to the legs.

  3. 3

    Find a rounded template to trace the shape of the seat. Mark the tracing onto the strip of sheet metal using a silver marker. Cut the seat of the chair out of the strip of sheet metal with the plasma cutter. Use an angle grinder to smooth the corners. Weld the seat to the four legs.

  4. 4

    Cut three or four back support rods out of the rectangular tube with the abrasive chop saw. Cut tabs from the sheet metal to fit over the hole in each tube. Cut a bar to lay across the back supports. Weld the back support bars evenly to the seat, then weld the top support bar to the back supports. Smooth any rough edges with a grinder. Paint your chair if you wish with a water-based industrial paint.

Tips and warnings

  • Purchase extra material in case you cut a piece too short.
  • It's best to perform your cutting and welding on a metal work table, which is not in danger of burning or other damage.
  • Always use welding tools with extreme caution. Have a professional train you on using these tools, and remember to wear gloves and a face mask.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.