DISCOVER
×

How to Reset the ABS Light on an Astro Van

Updated February 21, 2017

If the ABS light comes on in your Chevy Astro van, it means there is a fault with the anti-lock brake system. Resetting the light is a matter of fixing the problem with the brakes, then turning off the light via the vehicle's DIC control panel. It's a fairly easy fix that only takes a few minutes.

Take the vehicle to a mechanic and have the anti-lock brake system checked and any necessary repairs made. Usually this will turn off the ABS light, but not always. If not, proceed to Step 2.

Put the key into the ignition and turn it to the "Run" position (the position right before the one used to engage the engine).

Locate the DIC control panel on the dashboard in front of the driver's seat under the speedometer. Keep pushing and releasing the "Set" button on the DIC control panel until "ABS" is shown.

Hold the "Set" button for about 5 seconds to reset the light and turn it off.

Turn the key in the ignition to the "Off " position and remove the key.

Things You'll Need

  • Ignition key
Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Katie B. Marsh is a self-published author, article writer, screenwriter, and inventor. After graduating from South Coast College of Court Reporting, she worked as a congressional and freelance court reporter for eight years. She began her writing career in 2005. Her content may be found on amazon.com, booksforsharing.com, and ezinearticles.com. She completed her first screenplay in October 2009.