How to Troubleshoot a Konica Minolta Magicolor 2530 DL

Written by steven symes
  • Share
  • Tweet
  • Share
  • Email

The Konica Minolta Magicolor 2530 DL prints a full array of colours on pages using laser print technology. The printer feeds papers from one of two paper drawers at the bottom of the printer. These papers make their way through the printer with the aid of a system of feed rollers, especially the main feed roller, which is just below the print cartridge. After the printer applies toner to the pages, each page is heated up and pressed against a pressure roller to seal the toner in the page.

Skill level:
Moderately Easy


    Paper Jams

  1. 1

    Remove all paper in the printer's output paper tray, then fold the paper tray. Open the printer's top cover and remove the print cartridge.

  2. 2

    Press both plastic levers on either side of the printer as far back as they will go. Pull out any stuck paper, then pull the plastic levers back to their original position.

  3. 3

    Reinstall the print cartridge and close the top cover. Pull paper drawer 2 as far as it will come out of the printer, then lift up on the printer and pull it completely out of the printer.

  4. 4

    Pull out any stuck paper inside paper drawer 2's cavity. Open the drawer's cover and fan through the paper, then reinstall the paper, replace the lid and slide the drawer back into the printer.

  5. 5

    Pull down on the top of the duplexer's cover at the rear of the machine. Pull any stuck paper directly up and out of the rollers, then close the cover.

    Printouts Come Out Wrinkled

  1. 1

    Open the printer's input tray and remove all of the paper. Open a new package of paper and place the same amount in the paper tray, then close it.

  2. 2

    Replace the paper or other media you are printing on with paper made by Konica Minolta. Paper made by Konica Minolta will meet the specifications of the printer, while other brands may not.

  3. 3

    Open the printer's top cover and pull out the print cartridge. Examine the print cartridge and the feed roller inside the printer for damage.

  4. 4

    Take the printer to a repair shop for servicing if the feed roller is damaged, or replace the print cartridge if it is damaged. Press the levers on either side of the printer toward the front of the machine as far as they will go.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.