How to Calculate Stair Risers

Written by paul massey
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Calculate Stair Risers
Accurate calculation of step risers is key to a well-constructed stairway. (house construction interior 1 image by Paul Moore from

A properly designed staircase begins with some basic calculations to determine the length and height of each step, as well as the overall area needed for the stairs. The first of these critical preliminary measurements is the step height, commonly referred to as the "riser" height. Determining the necessary stair riser height also determines the number of threads and the overall length, known as the "run," of the staircase. The correct calculation of the risers will insure a well-built, comfortable staircase for your home.

Skill level:

Things you need

  • Tape measure
  • Plumb bob (optional)
  • Calculator

Show MoreHide


  1. 1

    Measure the vertical distance, in inches, between the first floor and the second floor surfaces at the proposed stair location. You can use a plumb bob to make certain the measurement is accurately vertical.

  2. 2

    Convert any fraction of an inch in the measurement to a decimal by dividing the bottom number, the denominator, into the top number, the numerator. For example, if the floor-to-floor measurement is 109 5/8 inches, the fraction is 5/8 inch. Divide 8 into 5 for the decimal equivalent of .625, which translates the floor-to-floor measurement as 109.625 inches.

  3. 3

    Divide the measurement determined in Steps 1 and 2 by a number that gives you an equal riser height between 7 inches and 8 inches each. For our example, the result for 109 5/8 inches is 14 risers at 7 13/16 inches each or 15 risers at 7 5/16 inches. Typically, the number of risers chosen will be influenced by the resulting stair run.

Tips and warnings

  • The run of the stairs can be determined by multiplying the tread width times the number of risers determined minus one riser.
  • National and local building codes typically specify the limits for residential riser heights between 7 inches and 8 inches. Consult your local building department to verify the code requirements for your area.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.