How to clean a p trap under a bathroom sink

Written by warren rachele
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to clean a p trap under a bathroom sink
Cleaning the P-trap under your sink will start the water flowing freely again. (water in a sink image by terex from Fotolia.com)

Look under the bathroom sink and you can see the simplicity of the plumbing system. The sink drains into a curved pipe that disappears into the wall behind the sink. The P-trap is the curved connection between the sink drain and the tail pipe in the wall. It holds water in the curve between uses of the sink, so that sewer gas does not come into the house through the open drain. That curve also serves as a place that traps the hair and soap scum, eventually stopping up the sink. Cleaning the P-trap is unpleasant but simple.

Skill level:
Easy

Other People Are Reading

Things you need

  • Slip-joint pliers or large adjustable wrench
  • Bucket
  • Rag or towel

Show MoreHide

Instructions

  1. 1

    Place the bucket under the P-trap to catch any water that drips out.

  2. 2

    Loosen the compression nuts at both ends of the P-trap. If the pipes are metal, use the slip-joint pliers or adjustable wrench to loosen the nuts. Wrap a rag around the nuts to prevent scratches. If the plumbing is PVC, no tools are used. Loosen the nuts by hand.

  3. 3

    Separate the P-trap from the drain pipes. Water will be in the trap so be sure the bucket is positioned to catch it. When the P-trap is free from the other pipes, turn it over and empty the remaining water into the bucket.

  4. 4

    Clean out the clog in the P-trap. Rinse out the P-trap in another sink or outside to clean all of the soap scum from the walls of the pipe. Leaving it in place will trap more debris sooner.

  5. 5

    Reassemble the P-trap to the fixed drain pipes. Be sure that any compression washers are seated before the nuts are retightened. PVC nuts should be tightened by hand only. Metal nuts can be tightened with the slip-joint pliers or wrench, but be careful not to over-tighten them and destroying the threads.

  6. 6

    Run water down the drain to test for leaks. Keep the bucket in place in the event that a leak should appear.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.