The little details will make your wedding special, such as a handmade ring bearer's pillow. The wedding ring cushion is a small pillow on which a junior member of the bridal party carries the wedding rings. These are generally small, ornate pillows that reflect the wedding's colours on white satin. A young boy, known as the ring bearer, carries the pillow down the aisle, holding the rings during the ceremony. If you create this little keepsake by hand, you will keep it in your family forever.
- Skill level:
Other People Are Reading
Things you need
- Two pieces of white satin fabric 10 inches by 10 inches
- Straight pins
- Sewing machine (optional)
- 9- by 9-inch pillow form
- 1-1/2 yards wide satin ribbon
- Narrow satin ribbon bow
- 2 inches of tassel
- 1-1/2 yards satin cording
- Imitation rings
Cut two squares of white satin fabric to 10 inches by 10 inches. Pin the right sides (shiny sides) together and stitch, leaving one side open. Remove the pins and turn the pillow inside out, making sure to push the corners out.
Insert the pillow form into the fabric pocket. Sew the remaining side closed.
Use 1-1/2 yards of wide satin ribbon to tie a bow around the middle of the pillow. Take straight pins and tack down the loops of your bow. Hide the pins in the loops.
Add another small bow made from narrow satin ribbon. This will hold imitation rings. Secure the small bow in any corner of the pillow with a few stitches.
Sew a 2-inch tassel onto 1-1/2 yards of satin cording. Fold the sewn piece in half and tie it around the large bow in the middle of the loops.
Take a hot glue gun and very carefully glue the imitation rings onto the small bow.
Tips and warnings
- The colours of the ribbons and cording should reflect the colours of your wedding.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for