Alinco DX-70 Output Power Problems

Written by whitney houston
  • Share
  • Tweet
  • Share
  • Email

The Alinco DX-70 50-megahertz all-mode transceiver receives and transmits signals from home or vehicle. A handheld microphone plugs into the front panel and allows you to speak to others. While transmitting through the DX-70, you might experience sudden power loss. There are a few things you can do to troubleshoot the cause.

Other People Are Reading

Cable

If the DX-70 doesn't have power, the DC power cable might be compromised. Disconnect the power cable from the back of the DX-70 to reset the connection. Allow a few seconds to pass and then plug the cable back in.

Fuse

If the transceiver is still without power, a fuse might have been blown. Inspect the fuse to determine the cause. The fuse might have been blown from an electricity surge. Correct the source of the surge and install a new fuse.

Power Supply

If the DX-70 is set up as a home base station and is without power, the power supply might be switched off. If you're using a power strip, confirm the strip is switched on. If the DX-70 is installed inside a car, confirm that the car battery is charged and the DX-70 cables are attached in accordance to proper polarity.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.