How to Remove a Corrado Front Bumper
The front bumper of the Volkswagen Corrado protects the front of the vehicle from damage that may result from low-speed collisions. If the front bumper is damaged in an accident, you should replace immediately. The bumper is held in place by nine bolts.
Once those bolts are removed with a socket wrench, you can easily remove the bumper and replace it with a new one.
Remove the four 17mm bolts on each side of the bumper with a socket wrench.
Crawl underneath the Corrado and disconnect the fog light assembly electrical connectors.
Pry the bumper liners off with a slotted screwdriver.
Remove the six 10mm bolts along the bottom of the bumper.
Lift the front bumper up and off your Corrado.
- "Volkswagen Corrado Official Factory Repair Manual 1990-1994"; Volkswagen Service Manuals; 1993