Hello, my name is Joshua Clement with Lighty contractors, and today we will be discussing how to install a bathroom sink drain trap. All you're going to need for this job is your drain trap, connectors, and washers, and a piece of pipe that's an inch and a quarter long. One of the biggest problems with bathroom sinks is that they don't have a P trap installed. A P trap is an S shape piece of pipe. It allows the water to come down through and then into the sewer system. One of the advantages to having a drain trap installed is that if you drop your wedding ring down the drain, it's going to get caught right here rather than going into the sewer system. Now, right here is your sewer pipe. This sewer pipe is two and a half inches. As you can see here, they converted it down from two and a half inches down to two inches, and then down to your inch and a quarter. This allows us to place our inch and a quarter pipe right through the top of it and tighten it down. Now that we have our inch and a quarter pipe installed, go ahead and take your drain trap and install it on the pipe that is coming down from the sink. As you can see, we already have our bolt on there. Slide it up and tighten. Take your P trap and twist it till it lines up with your sewer line. Take your P trap and slide it over the inch and a quarter pipe. Take your washer, slide it up to the P trap and tighten the nut. And that's it. I'm Joshua Clement with Lighty contractors, and that's how you install a bathroom sink drain trap.
- How to Remove & Replace a Shower Head
- How to Fix Sliding Shower Doors
- How to Fix a Toilet Paper Holder
- How to Install a Bathroom Sink Drain Trap
- How to Repair a Low-Flush Toilet
- How to Repair a Gooseneck Kitchen Faucet
- How do I Remove Bath Tub Drain Stopper?
- How to Repair or Replace a Garbage Disposal