Angle Iron Hanger Weight Specifications

Written by chuck ayers
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Angle Iron Hanger Weight Specifications
It is very common to use large angle irons to reinforce and stabilise construction girders of high-rise buildings. (metal constructions image by ssg from Fotolia.com)

Angle irons are L-shaped flat galvanised steel struts used for a wide range of construction and household functions. Large angle irons often help stabilise steel beams while smaller angle irons are used to construct household items such as bed frames, benches and shelving. Most angle irons have pre-punched holes spaced at regular intervals to offer screw installation to support various weights or tensions at various lengths. For construction purposes and as supports in solid materials such as wood or metal, the weight bearing capacity of the angle iron is integral to overall structural integrity. For shelving screwed into drywall, the weight bearing capacity of the angle iron must also include calculations for the weight-bearing capacity of the anchor bolts.

Other People Are Reading

Sizing and Lengths

Angle irons are measured by their vertical length, horizontal length and thickness, usually in that order. So if you're looking for a 3-inch by 3-inch by ½-inch angle iron, you would specify the lengths followed by the thickness. A single angle iron that size screwed into solid wood or other solid material can support 1.77kg. of deadweight. If the angle iron is used for shelving, you would use at least two to hold 3.54kg. Three angle irons could support 5.31kg. By comparison, a 6-inch by 6-inch angle iron that is ½ inch thick can support 88.9kg and, since you would need at least two angle irons of that size to stabilise a shelf, the shelf could hold 149kg. A third angle iron would enable the shelf to hold 193kg.

Angle Irons in Wallboard

Using angle irons in drywall requires an extra calculation to ensure that the load weight capacity of the angle irons don't overstress the anchor bolts or toggle bolts you need to hang shelving. Using the 6-by-6 example, a toggle bolt of 1/8-inch diameter would hold up to 13.6kg. before it would pull away from the wallboard. So, you would need a toggle bolt of twice that diameter, or ¼ inch, to handle 22.7kg. of tension weight.

Industrial and Construction Uses

Angle irons are versatile in industrial and general construction uses. There is a direct correlation between the size of an angle iron and its weight capacity. In commercial use, they are commonly used for building reinforcement, athletic flooring systems, joists, studs and control and expansion joints. Their usefulness extends to railroad track and supports, and a host of uses in the aerospace, automotive, HVAC, hardware and storage industries. When using large angle irons, you can calculate weight capacities using software.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.