How to Repair a Passenger Seat Belt in a Chevy Blazer

Written by andrea walk
  • Share
  • Tweet
  • Share
  • Email

The Chevrolet Blazer is a heavy-duty sport utility vehicle manufactured by General Motors. The Chevy Blazer comes equipped with both front and rear-seat seat belts. With possibly the exception of safety air bags, seat belts are the most crucial safety feature in the Chevy Blazer. If the Blazer is ever in an accident or if the seat belts ever malfunction, they should be replaced immediately.

Skill level:

Things you need

  • Socket set
  • Screwdriver
  • Star head sockets

Show MoreHide


  1. 1

    Open the front passenger side door and use a Phillips screwdriver to remove the piece of plastic trim that runs along the bottom of the door. Depending on the year of the Blazer, the piece of floor-door trim on the passenger back seat may have to be removed as well. Set the trim pieces and their screws aside in a safe spot.

  2. 2

    Use a flathead screwdriver to pry off the plastic trim panel that runs vertically between the front and rear seat to gain full access to the seat belt.

  3. 3

    Use a wrench to remove both the upper and lower seat belt assemblies.

  4. 4

    Hold the new upper seat belt assembly in place and bolt it down with the socket set. Do the same to bolt the lower half of the assembly to the floor.

  5. 5

    Snap the plastic horizontal trim cover back into place.

  6. 6

    Lay down both pieces of the lower door trim panel pieces and reinstall their retaining screws with the screwdriver.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.