How to Fix a Furby That Will Not Turn On

Written by simon dean
  • Share
  • Tweet
  • Share
  • Email

The Furby took the world by storm when it was released in 1998, going on to sell over 40 million units worldwide by 2000. Despite being more than years old, Furby is still popular today with adults and children alike. With such a large ageing population of animatronic toys at large, some have understandably developed issues. If your Furby is refusing to turn on or respond to any stimulus there are a number of steps that can be followed to remedy the problem.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Small Phillips screwdriver
  • 4 new "AA" batteries
  • Cocktail stirring stick

Show MoreHide


  1. 1

    Turn your Furby over. Open the battery compartment with a small screwdriver and remove the batteries. Fit a new set of batteries, ensuring that the "+/-" polarity markings are aligned correctly according to the diagram in the battery compartment. Replace the battery cover.

  2. 2

    Turn your Furby back over, holding it by the body and gently shake it. The base should be moving freely as you shake.

  3. 3

    Reset your Furby. Use a small pointed object such as a cocktail stick to press the reset button. Access the button through the small hole adjacent to the battery cover on his base. Resetting will not erase the Furby's memory.

  4. 4

    Restart your Furby. Use this step only as a last resort, as it will result in the Furby's memory being erased. Hold the Furby upside down, put a finger in its mouth, hold down the tongue button, and press the reset button on the base with a cocktail stick. Furby will revert to its "childhood" stage, as when it was new. It will need to go through its four learning stages once again.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.