How to hinge a shed door

Written by john walker
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to hinge a shed door
Properly installed doors do not sag or fall open easily. (Jupiterimages/ Images)

Installing a shed door requires levelling the door properly while attaching the hinges. The process is relatively difficult to do on your own. Using shims and partially installing the hinges alleviates a lot of the work. The best method for installing hinges onto a shed door involves using sturdy, exterior hinges, a few common tools and prefabricated doors. Always build the shed before installing the doors. Levelling the doors after installing on a completed shed is even more difficult.

Skill level:

Other People Are Reading

Things you need

  • Exterior hinges
  • Drill
  • Screwdriver drill bit
  • Mounting screws
  • Level
  • Wood shims

Show MoreHide


  1. 1

    Attach the hinges to the door frame using one screw per hinge initially. The hinge aspect, a metal rod connecting the two halves of the hinge, should be flush with the exterior edge of the frame. Drive the mounting screws through one screw hole in the hinge into the frame, with a drill and screwdriver drill bit.

  2. 2

    Hold a level flush with the top of the screw hole used in Step 1 and the matching screw-hole on the other half of the hinge. Adjust the position of the hinge so that the screw holes are level with each other. Drive additional mounting screws into the frame through the hinge to lock the position. Repeat for all the hinges.

  3. 3

    Press the door into place within the frame. Hammer wood shims, small strips of triangular-shaped wood, in between the door and the frame to obtain a slight gap between each edge of the door and the frame. The door must be centred within the frame.

  4. 4

    Push the hinges against the door. Drive one mounting screw through each hinge into the door. Tighten the screws properly. Remove the wood shims and the door should remain in the proper position.

  5. 5

    Test the door for proper function. Remove the screws from the door and adjust the position as necessary until the door swings properly. Drive additional mounting screws into the door through the hinge to lock in the position.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.