How to Monitor Building Settlement

Written by sumei fitzgerald
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Monitor Building Settlement
You can measure how much a building is moving by measuring cracks in the foundation. (Cracked Wall image by Lee Mann from

Buildings may move and settle because of ground shifts and other geological events, but building settlement is most often due to collapsing sewers, water leaks and problems with drainage pipes, according to the Property Repair Systems website. Some buildings suddenly shift and are then fine for a number of years. The cracks in other foundations may continue to grow, endangering the stability of the building. Available are a number of do-it-yourself methods to monitor building settlement, ranging from the simple and less reliable to the more involved and precise.

Skill level:

Things you need

  • Tape
  • Pencil
  • Wooden wedge
  • Piece of pectangular glass
  • Plastic plugs or resin

Show MoreHide


  1. 1

    Locate a crack in your foundation. Place a piece of tape over the crack and mark it with a pencil at each side of the crack. If the crack widens, the tape will slide along the wall and move away from the pencil lines. This method is simple, but it is a somewhat unreliable way of monitoring building settlement.

  2. 2

    Cut a piece of dry wood into a wedge shape. Tap it into the crack somewhat firmly. If the foundation crack widens, the timber will fall out. Moisture can cause the wood wedge to shrink and expand, so it is the least reliable way of monitoring building settlement. You can increase certainty by combining this method with the tape procedure.

    How to Monitor Building Settlement
    Trim a wooden wedge, so it fits into the foundation crack. (wooden house image by Jelena Voronova from
  3. 3

    Purchase a piece of glass 9 inches by 4 inches that is about 1/6 of an inch thick. Ask a glazing merchant to drill a quarter-inch hole in each corner. Use plastic plugs or resin and rubber washers to affix the glass across the foundation crack. Take care not to turn the screws too tightly or the glass will break. If the building moves anymore, the glass will break, the Property Repair Systems website reports.

    How to Monitor Building Settlement
    Drill holes in the foundation to affix a glass rectangle across the crack. (drill image by jovica antoski from
  4. 4

    Purchase a professional kit to monitor building settlement if you're still unsure about how serious the degree of movement is. Crack monitoring gauges measure both the horizontal and vertical movement along a foundation crack with a high degree of accuracy.

  5. 5

    Contact a building surveyor or structural engineer to confirm your suspicions and seek solutions.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.