How to Mount a Scooter Trunk

Written by tom lutzenberger
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Mount a Scooter Trunk
Many scooters allow for the attachment of a rear case or boot for extra luggage space. (man on the cycle on the road, scooter image by alma_sacra from

After riding a scooter on longer and longer trips, the option of having a scooter boot or rear case may start to seem appealing, particularly for carrying extra supplies, food or a spare jacket. Installation on most models tends to be easy; you just need to have the right parts.

Skill level:

Other People Are Reading

Things you need

  • Screwdrivers (both Phillips and flathead)
  • Scooter rear rack
  • Socket wrench set or crescent wrenches
  • Power drill with metal drilling bits

Show MoreHide


  1. 1

    Confirm whether your scooter already has a scooter rack to hold up a rear boot. Order an appropriate rear rack for your scooter model if needed. Use a socket wrench and crescent wrenches to install the scooter rack using the instructions that come with the rack. Drill holes into the scooter body rear to attach the rack if they don't already exist.

  2. 2

    Purchase a scooter boot or rear case if you don't have one. Locate the hardware for installation. Place the scooter boot on the rear rack for fitting. Make sure the opening side of the boot faces away from the driver. Finish placement and insert the hardware on the bottom of the boot to the rear rack. Use your screwdrivers, crescent wrenches and socket wrench to tighten the hardware. Attach the cross bar underneath if the securing process uses a bar. Screw the bottom screws into the rack if the screws are the securing method. Keep the parts loose to confirm proper fitting and avoid stripping any parts or nuts.

  3. 3

    Check to make sure the boot opens properly with sufficient clearance from the scooter seat. Tighten all the hardware so that the boot doesn't wiggle or move around. Avoid overtightening. Make sure to use washers to avoid impressions by the securing nuts or screws into the boot surface. Confirm all necessary hardware has been used. Take the scooter for a test ride when you are finished.

Tips and warnings

  • You may be able to use a scooter model boot for one scooter on a different model. However, keep in mind it may take some modifications to fit properly. Old trunks made in the 1970s tend to be the easiest because they use a cross bar on the bottom to secure to a rear rack. Newer, more compact cases tend to be scooter-specific for default fitting.
  • Don't overload your boot case with heavy cargo. The only thing keeping the boot on the scooter rack is the hardware. An overweight scooter boot could rip off while riding and bounce down the road behind you.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.